tube furnace

Our products cover muffle furnace,tube furnace,vacuum furnace,atmosphere furnace,CVD system,dental furnace

Details of cleaning of tube laboratory furnace

Tube-type experimental furnaces are generally used for experiments, mostly for quantitative analysis of sintering and ashing experiments; tube-type furnaces are a kind of batch-type resistance furnace, but it does not mean that batch-type electric furnaces are tube-type experimental furnaces.
tube laboratory furnace
The gas burner of the tube furnace needs to be cleaned with kerosene before carburizing. The furnace tank of the tube furnace is cleaned weekly during continuous production. The cleaning of the intermittent production furnace should be carried out immediately after the furnace is shut down.
   When the cleaning temperature of the tube furnace tank is 850 ~ 870 ℃, the chassis should be taken out.

   When using a compressed air nozzle to blow in from the feed end of the tube-type experimental furnace, the valve should not be opened too much, and it should be moved back and forth to avoid partial overheating.

    Remind you the precautions when using the tube-type experimental furnace: always pay attention to the burning situation in each area and the gas pressure; not stand by the side when the furnace door is opened to prevent the flame from erupting and burn; pay attention to whether the incinerator nozzle of the department is burned and used torches Check whether the wedge-shaped door is leaking; when the flame of the incinerator is found during work, the gas valve should be closed immediately, and then the air valve should be closed; in the tube furnace | tube-type experimental furnace when the parts are dropped or the wedge-shaped door switch is not working, you should Stop feeding and take out parts.

Please Leave A Message