tube furnace

Our products cover muffle furnace,tube furnace,vacuum furnace,atmosphere furnace,CVD system,dental furnace

Single temperature zone tube furnace

   At present, the single temperature zone tube furnace uses silicon carbide rods, silicon molybdenum rods and other materials as heating elements, and the maximum temperature can reach 1700 degrees. Because there are many models of single temperature zone tube furnaces, including PT1200, PT1400, PT1600, PT1700, PT1800, etc., today we are going to talk about the specific introduction of PT1600 atmosphere tube furnace.
 
Single temperature zone tube furnace
    PT1600 Atmosphere Tube Furnace is a relatively popular product at present. It uses silicon molybdenum rods as heating elements, adopts double-layer shell structure and temperature control instruments, and can carry out 30-segment temperature control, phase shift triggering, and SCR control. The furnace is made of alumina polycrystalline fiber material. The two ends of the furnace tube are sealed with stainless steel flanges. The stainless steel flanges are equipped with gas nozzles, valves and pressure gauges. The vacuum degree can reach 10-3 Pa when vacuuming, and the temperature field is balanced. The advantages of low surface temperature, rapid temperature rise and fall, and energy saving, are ideal products for universities, scientific research institutes, and industrial and mining enterprises for high-temperature atmosphere sintering, atmosphere reduction, CVD experiments, and vacuum annealing. Click to enter more models of tube furnaces.
 
   The thickness of the silicon-molybdenum rod used in this tube furnace is 7mm, the heating end is thick, not easy to bend, the rod surface load is low, and the service life is longer. In addition, the oxide amorphous film on the surface of the silicon molybdenum rod is dense, which can better protect the silicon molybdenum rod. Moreover, the PT1600 atmosphere tube furnace is equipped with a communication interface and software, which can directly control the parameters of the furnace through the computer, and can observe the PV and SV temperature values ​​on the furnace and the operation of the instrument from the computer, and the actual heating curve of the furnace The computer will draw it in real time, and it can save the temperature data at each moment, which can be recalled at any time, which is very convenient.
 
    And the hearth we use is imported hearth shaped by Japanese technology. The furnace material has low heat capacity and low thermal conductivity, so it has the characteristics of low heat dissipation, good heat preservation, high reflectivity, and balanced temperature field. It has the advantages of high temperature resistance, strong resistance to thermal expansion and contraction, and not easy to drop powder.
 
PT1400, 1600, 1700, 1800 series of tube furnaces are all high-selling products, each with its own advantages, if you have any questions, you can contact us at any time.

Please Leave A Message