tube furnace

Our products cover muffle furnace,tube furnace,vacuum furnace,atmosphere furnace,CVD system,dental furnace

What are the safe operation skills of box type resistance furnace

What are the safe operation techniques for box-type resistance furnaces? Box-type resistance furnace is an indispensable equipment for high-temperature heat treatment experiments and is widely used in various enterprises, institutions and universities.

   1. Before turning on the power, check whether the wiring is in compliance and whether the wiring screws on the controller are loose.

   2. Weigh the sample and put it in the furnace, close the furnace door, and open the box-type resistance furnace switch.

   3. Pull the switch on the controller to the "set" position and set the test temperature.

  4. After the setting is completed, pull the switch back to the "measurement" position, the box-type resistance furnace starts to heat up, and the meter is displayed by a green indicator light.

  5. Turn off the Luoyang box-type resistance furnace switch when the working time is up, and take out the sample after cooling down.

  6. ​​Be sure to cut off the power when loading and taking samples to prevent electric shock.

   7. Wear special gloves when loading and taking samples to prevent burns.

   8. Do not exceed the maximum temperature of the resistance furnace during use.

   9. The opening time of the furnace door should be as short as possible when loading and taking samples to extend the service life of the box-type resistance furnace.

  10. Do not put samples stained with water and oil into the furnace; do not use clamps stained with water and oil to load and take samples.

  11. It is forbidden to pour any liquid into the furnace.

  12. Do not touch the box-type resistance furnace and surrounding samples casually.

  13. The sample should be placed in the middle of the furnace, neatly placed, and do not place it randomly.

  14. Cut off the power and water after use.

   15. Without the permission of the management personnel, no box-type resistance furnace is allowed to operate, and the operation shall be carried out in strict accordance with the operating procedures of the equipment.

Please Leave A Message