tube furnace

Our products cover muffle furnace,tube furnace,vacuum furnace,atmosphere furnace,CVD system,dental furnace

Just 13 tricks, easy to play box-type electric stove

The editor teaches you only 13 tricks to easily play with box-type electric furnaces :
box-type electric furnaces
1. Before starting the furnace, check the gas pipeline valve tightness and the pressure on the gas pipeline cannot be lower than the specified value.    

2. Empty furnace test push rod mechanism, pull rod mechanism and lifting mechanism work.    

3. Loosen the compression spring to the specified size range.    

4. Adjust the water level of the water seal, open the valve of the water seal to discharge the combustion pipe, and close the valve of the water seal.    

5. Close the furnace door at the feed end, open the furnace door at the discharge end, and close the furnace door when the direction of kerosene spraying and misting is normal. 

6. Ignite the burner of the feed chamber.    

7. Exhaust gas should be discharged through a valve with no water seal.    

8. Discontinuous production first carburizes the furnace pot.    

9. When the parts are placed, the distance between the parts and the parts is not less than 5 mm; the edge of the parts does not exceed the length of the base plate and the specified height.    

10. To quickly open and close the inlet and outlet doors, but the speed of the push-pull rod must be steady.    

11. The position of the parts in the pre-cooling chamber should be directly under the thermocouple .    

12. The furnace is only allowed to be filled with 24 chassis, and the continuous feeding must be pulled and then pushed.    

13. When the furnace is shut down, the furnace area should be cooled to the same temperature, and then the temperature should be cooled naturally.  

Please Leave A Message